UX60-MIB DEFINITIONS ::= BEGIN

IMPORTS
     enterprises, OBJECT-TYPE                                            FROM RFC1155-SMI
--     mib-2                                                             FROM RFC1213-MIB
     TRAP-TYPE                                                           FROM RFC-1215;

smartTechULC OBJECT IDENTIFIER
        ::= { enterprises 29485}

smartTechProducts OBJECT IDENTIFIER
        ::= {smartTechULC 3}

smartTechEmbeddedProducts OBJECT IDENTIFIER
        ::= {smartTechProducts 2}

ux60 OBJECT IDENTIFIER 
        ::= { smartTechEmbeddedProducts 4 }

powerState OBJECT-TYPE
        SYNTAX  INTEGER { 
                        onState(1),
                        offState(2),
                        poweringOnState(3),
                        coolingState(4),
                        confirmOffState(5)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Write to on/off to turn the projector on or off.  Cooling and powering status only for reads."
        ::= { ux60 1 }


video OBJECT IDENTIFIER 
        ::= { ux60 2 }

inputSource OBJECT-TYPE
        SYNTAX  INTEGER {
                        vga1(1),
                        vga2(2),
                        composite(3),
                        svideo(4),
                        hdmi(5)
                         }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "To display the current input source as well as
                switch between input sources. Set to the following
                to switch to the specified source:
                1: VGA-I 1
                2: VGA-I 2
                3: Composite
                4: S-Video
                5: HDMI"
        ::= { video 1 }

currentInput OBJECT IDENTIFIER 
        ::= { video 6 }

displayMode OBJECT-TYPE
        SYNTAX  INTEGER {
                        brightRoom(1),
                        darkRoom(2),
                        sRGB(3),
                        user(4),
                        smartPresentation(5)  }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Display Mode"
        DEFVAL { smartPresentation }
        ::= { currentInput 1 }

brightness OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Brightness."
        ::= { currentInput 2 }

contrast OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Contrast."
        ::= { currentInput 3 }

frequency OBJECT-TYPE
        SYNTAX  INTEGER (-5..5)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Frequency"
        ::= { currentInput 4 }

tracking OBJECT-TYPE
        SYNTAX  INTEGER (0..63)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Tracking"
        ::= { currentInput 5 }

saturation OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Saturation"
        ::= { currentInput 6 }

tint OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Tint"
        ::= { currentInput 7 }

sharpness OBJECT-TYPE
        SYNTAX  INTEGER (0..31)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Sharpness"
        ::= { currentInput 8 }

whitepeaking OBJECT-TYPE
        SYNTAX  INTEGER (0..10)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video White Peaking"
        ::= { currentInput 9 }

degamma OBJECT-TYPE
        SYNTAX  INTEGER (0..3)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Degamma"
        ::= { currentInput 10 }

red OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Red"
        ::= { currentInput 11 }

green OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Green"
        ::= { currentInput 12 }
blue OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Blue"
        ::= { currentInput 13 }
cyan OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Cyan"
        ::= { currentInput 14 }
magenta OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Magenta"
        ::= { currentInput 15 }
yellow OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Yellow"
        ::= { currentInput 16 }

aspectRatio OBJECT-TYPE
        SYNTAX  INTEGER {
                        fill(1),
                        match(2),
                        widescreen169(3) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Aspect Ratio"
        DEFVAL { fill }
        ::= { video 7 }

zoom OBJECT-TYPE
        SYNTAX  INTEGER (0..30)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Zoom"
        ::= { video 8 }

hposition OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Horizontal Position"
        ::= { video 9 }

vposition OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Vertical Position"
        ::= { video 10 }


videoMute OBJECT-TYPE
        SYNTAX  INTEGER {
                        off(1),
                        on(2)  }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Mute enable/disable"
        DEFVAL { off }
        ::= { video 12 }

videoFreeze OBJECT-TYPE
        SYNTAX  INTEGER {
                        unfreeze(1),
                        freeze(2)  }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Freeze / Unfreeze the Video Display"
        DEFVAL { unfreeze }
        ::= { video 13 }

audio OBJECT IDENTIFIER 
        ::= { ux60 3 }

audioVolume OBJECT-TYPE
        SYNTAX  INTEGER (-20..20)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Audio volume.
                -20 is the minimum and 20 is the maximum."
        ::= { audio 1 }


audioMute OBJECT-TYPE
        SYNTAX  INTEGER {
                        muteoff(1),
                        muteon(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "To mute audio set to 2.
                To un-mute audio set to 1."
        DEFVAL { muteoff }
        ::= { audio 2 }

audioVolumeControl OBJECT-TYPE
        SYNTAX  INTEGER {
                        controloff(1),
                        controlon(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "To control the audio, set to 2.
                To not control the audio, set to 1."
        DEFVAL { controlon }
        ::= { audio 3 }

audioCloseCaptioning OBJECT-TYPE
        SYNTAX  INTEGER {
                        off(1),
                        on(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Enable close captioning set to 2.
                To disable close captioning set to 1."
        DEFVAL { off }
        ::= { audio 4 }

audioCloseCaptioningLanguage OBJECT-TYPE
        SYNTAX  INTEGER {
                        cc1(1),
                        cc2(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Close Captioning Language CC1/CC2"
        DEFVAL { cc1 }
        ::= { audio 5 }

network OBJECT IDENTIFIER 
        ::= { ux60 4 }

netStatus OBJECT-TYPE
        SYNTAX  INTEGER {
                        connected(1),
                        disconnected(2) }
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Status of the network.  Currently it will always be connected if this can be read."
        DEFVAL { connected }
        ::= { network 1 }

netDHCP OBJECT-TYPE
        SYNTAX  INTEGER {
                        disable(1),
                        enable(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "To enable DHCP set to 2.
                To disable DHCP set to 1.
                    Note: you must reboot for
                    static setings to take effect."
        DEFVAL { enable }
        ::= { network 2 }

netIPAddress OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "IP Address of the device."
        ::= { network 3 }

netSubnetMask OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "IP Configuration Netmask."
        ::= { network 4 }

netGateway OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Gateway configuration."
        ::= { network 5 }

netPrimaryDNS OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Primary DNS Server configuration."
        ::= { network 6 }

netMacAddress OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "MAC Address."
        ::= { network 7 }

config OBJECT IDENTIFIER 
        ::= { ux60 5 }

configLanguage OBJECT-TYPE
        SYNTAX  INTEGER {
                        english(1),
                        spanish(2),
                        french(3),
                        brazilianPortuguese(4),
                        japanese(5),
                        simplifiedChinese(6),
                        traditionalChinese(7),
                        korean(8),
                        german(9),
                        italian(10),
                        dutch(11),
                        danish(12),
                        finnish(13),
                        greek(14),
                        norwegian(15),
                        polish(16),
                        czech(17),
                        swedish(18),
                        iberianPortuguese(19),
                        russian(20)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Set to the following to switch between 
                different languages:
                 1: English
                 2: Spanish
                 3: French
                 4: Brazilian Portuguese
                 5: Japanese
                 6: Simplified Chinese
                 7: Traditional Chinese
                 8: Korean
                 9: German
                10: Italian
                11: Dutch
                12: Danish
                13: Finnish
                14: Greek
                15: Norwegian
                16: Polish
                17: Czech
                18: Swedish
                19: Iberian Portuguese
                20: Russian"
        DEFVAL { english }
        ::= { config 1 }

configReset OBJECT-TYPE
        SYNTAX  INTEGER { reset(1) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Set to 1 will cause the projector to reset."
        ::= { config 2 }


sysInfo OBJECT IDENTIFIER 
        ::= { ux60 6 }

sysInfoOutputFormat OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Current Resolution the system is outputting."
        ::= { sysInfo 1 }


sysInfoFWVerDDP OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "DDP2230 Firmware Version"
        ::= { sysInfo 2 }


sysInfoLampHour OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Attached Projector Lamp Hours.  If 
                written to a value of zero, the value is
                reset.  All other writes are ignored.
                "
        ::= { sysInfo 3 }

sysAutoSignal OBJECT-TYPE
        SYNTAX  INTEGER { 
                        on(1),
                        off(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Turn on/off autosignal."
        ::= { sysInfo 4 }

sysLampReminder OBJECT-TYPE
        SYNTAX  INTEGER { 
                        on(1),
                        off(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Turn on/off lamp reminder."
        ::= { sysInfo 5 }

sysHighBrightness OBJECT-TYPE
        SYNTAX  INTEGER { 
                        on(1),
                        off(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Turn on/off high brightness."
        ::= { sysInfo 6 }

sysAutoPowerOff OBJECT-TYPE
        SYNTAX  INTEGER (0..180)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Turn on/off auto Power Off."
        ::= { sysInfo 7 }

sysProjectorID OBJECT-TYPE
        SYNTAX  INTEGER (0..99)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Projector ID"
        ::= { sysInfo 8 }

sysStartupScreen OBJECT-TYPE
        SYNTAX  INTEGER { 
                        smart(1),
                        usercapture(2),
                        preview(3)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Startup Screen."
        ::= { sysInfo 10 }

sysGroupName OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Projector Group Name"
        ::= { sysInfo 11 }

sysProjectorName OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Projector Name."
        ::= { sysInfo 12 }

sysLocation OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Location"
        ::= { sysInfo 13 }

sysContact OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Contact"
        ::= { sysInfo 14 }

sysDisplayHour OBJECT-TYPE
        SYNTAX  INTEGER (0..20000)
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Display Hours."
        ::= { sysInfo 15 }

sysModelNumber OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Model Number of the projector"
        ::= { sysInfo 16 }

sysInfoFWVerMpu OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "MPU Firmware Version"
        ::= { sysInfo 17 }

sysInfoFWVerNet OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "NET Firmware Version"
        ::= { sysInfo 18 }

sysInfoSerialNumber OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Projector Serial Number"
        ::= { sysInfo 19 }

sysInfoFWVerECP OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "ECP Firmware Version"
        ::= { sysInfo 20 }


serviceMenu OBJECT IDENTIFIER 
        ::= { ux60 7 }

serviceFailureLog OBJECT-TYPE
        SYNTAX  INTEGER { 
                        normal(1),
                        overtemp(2),
                        fanlock(3),
                        lamperror(4),
                        colorwheelbreak(5),
                        lampoverheat(6),
                        lampdriver(7)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Failure log"
        ::= { serviceMenu 1 }

serviceRestoreDefaults OBJECT-TYPE
        SYNTAX  INTEGER { restore(1) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Set to 1 to restore factory defaults.
                NOTE: UX60 will reboot immediately after."
        ::= { serviceMenu 2 }

serviceHighSpeedFan OBJECT-TYPE
        SYNTAX  INTEGER { 
                        high(1),
                        normal(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Fan Speed"
        ::= { serviceMenu 3 }

serviceProjectionMode OBJECT-TYPE
        SYNTAX  INTEGER { 
                        front(1),
                        ceiling(2),
                        rear(3),
                        rearceiling(4)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Projection Mode."
        ::= { serviceMenu 4 }


failureLogTrap TRAP-TYPE
        ENTERPRISE  smartTechULC
        VARIABLES   { serviceFailureLog }
        DESCRIPTION
                    "A failure has occured.  Send out the notification!"
        ::= 1

powerStateChange TRAP-TYPE
        ENTERPRISE  smartTechULC
        VARIABLES   { powerState }
        DESCRIPTION
                    "Power state on the projector has changed."
        ::= 2

END