LigthRaise60wi-MIB DEFINITIONS ::= BEGIN

IMPORTS
     IpAddress, enterprises, OBJECT-TYPE              FROM RFC1155-SMI
--     mib-2                                                             FROM RFC1213-MIB
     TRAP-TYPE                                                     FROM RFC-1215;

smartTechULC OBJECT IDENTIFIER
        ::= { enterprises 29485}

smartTechProducts OBJECT IDENTIFIER
        ::= {smartTechULC 3}

smartTechEmbeddedProducts OBJECT IDENTIFIER
        ::= {smartTechProducts 2}

ligthRaise60wi OBJECT IDENTIFIER 
        ::= { smartTechEmbeddedProducts 8 }

powerState OBJECT-TYPE
        SYNTAX  INTEGER { 
                        onState(1),
                        offState(2),
                        poweringOnState(3),
                        coolingState(4),
                        confirmOffState(5) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Write to on/off to turn the projector on or off.  Cooling and powering status only for reads."
        ::= { ligthRaise60wi 1 }


video OBJECT IDENTIFIER 
        ::= { ligthRaise60wi 2 }

inputSource OBJECT-TYPE
        SYNTAX  INTEGER {
                        vga1(1),
                        composite(3),
                        hdmi(5)
                         }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "To display the current input source as well as
                switch between input sources. Set to the following
                to switch to the specified source:
                1: VGA
                3: Composite
                5: HDMI"
        ::= { video 1 }

vga1 OBJECT IDENTIFIER 
        ::= { video 2 }

vga1DisplayMode OBJECT-TYPE
        SYNTAX  INTEGER {
                        brightClassroom(1),
                        darkClassroom(2),
                        sRGB(3),
                        user(4),
                        smartPresentation(5),
                        whiteBoard(6),
                        wallColor(7) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Display Mode"
        DEFVAL { brightClassroom }
        ::= { vga1 1 }

vga1Brightness OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Brightness."
        ::= { vga1 2 }

vga1Contrast OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Contrast."
        ::= { vga1 3 }

vga1Frequency OBJECT-TYPE
        SYNTAX  INTEGER (-5..5)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Frequency"
        ::= { vga1 4 }

vga1Tracking OBJECT-TYPE
        SYNTAX  INTEGER (0..63)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Tracking"
        ::= { vga1 5 }

vga1WhitePeaking OBJECT-TYPE
        SYNTAX  INTEGER (0..10)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video White Peaking"
        ::= { vga1 6 }

vga1Degamma OBJECT-TYPE
        SYNTAX  INTEGER (0..3)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Degamma"
        ::= { vga1 7 }

vga1Red OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Red"
        ::= { vga1 8 }

vga1Green OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Green"
        ::= { vga1 9 }

vga1Blue OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Blue"
        ::= { vga1 10 }

vga1Cyan OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Cyan"
        ::= { vga1 11 }

vga1Magenta OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Magenta"
        ::= { vga1 12 }

vga1Yellow OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Yellow"
        ::= { vga1 13 }

vga1WallColor OBJECT-TYPE
         SYNTAX  INTEGER {
                        color1(1),
                        color2(2),
                        color3(3),
                        color4(4),
                        color5(5) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Wall Color"
        DEFVAL { color1 }
        ::= { vga1 14 }

vga1Hposition OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Horizontal Position"
        ::= { vga1 15 }

vga1Vposition OBJECT-TYPE
        SYNTAX  INTEGER (-5..5)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Vertical Position"
        ::= { vga1 16 }

composite OBJECT IDENTIFIER 
        ::= { video 4 }

compositeDisplayMode OBJECT-TYPE
        SYNTAX  INTEGER {
                        brightClassroom(1),
                        darkClassroom(2),
                        sRGB(3),
                        user(4),
                        smartPresentation(5),
                        whiteBoard(6) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Display Mode"
        DEFVAL { brightClassroom }
        ::= { composite 1 }

compositeBrightness OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Brightness."
        ::= { composite 2 }

compositeContrast OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Contrast."
        ::= { composite 3 }

compositeSaturation OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Saturation"
        ::= { composite 4 }

compositeTint OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Tint"
        ::= { composite 5 }

compositeSharpness OBJECT-TYPE
        SYNTAX  INTEGER (0..31)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Sharpness"
        ::= { composite 6 }

compositeWhitepeaking OBJECT-TYPE
        SYNTAX  INTEGER (0..10)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video White Peaking"
        ::= { composite 7 }

compositeDegamma OBJECT-TYPE
        SYNTAX  INTEGER (0..3)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Degamma"
        ::= { composite 8 }

compositeRed OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Red"
        ::= { composite 9 }

compositeGreen OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Green"
        ::= { composite 10 }

compositeBlue OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Blue"
        ::= { composite 11 }

compositeCyan OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Cyan"
        ::= { composite 12 }

compositeMagenta OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Magenta"
        ::= { composite 13 }

compositeYellow OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Yellow"
        ::= { composite 14 }

compositeWallColor OBJECT-TYPE
         SYNTAX  INTEGER {
                        color1(1),
                        color2(2),
                        color3(3),
                        color4(4),
                        color5(5) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Wall Color"
        DEFVAL { color1 }
        ::= { composite 15 }

hdmi OBJECT IDENTIFIER 
        ::= { video 11 }

hdmiDisplayMode OBJECT-TYPE
        SYNTAX  INTEGER {
                        brightClassroom(1),
                        darkClassroom(2),
                        sRGB(3),
                        user(4),
                        smartPresentation(5),
                        whiteBoard(6),
                        wallColor(7) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Display Mode"
        DEFVAL { brightClassroom }
        ::= { hdmi 1 }

hdmiBrightness OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Brightness."
        ::= { hdmi 2 }

hdmiContrast OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Contrast."
        ::= { hdmi 3 }

hdmiWhitepeaking OBJECT-TYPE
        SYNTAX  INTEGER (0..10)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video White Peaking"
        ::= { hdmi 4 }

hdmiDegamma OBJECT-TYPE
        SYNTAX  INTEGER (0..3)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Degamma"
        ::= { hdmi 5 }

hdmiRed OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Red"
        ::= { hdmi 6 }

hdmiGreen OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Green"
        ::= { hdmi 7 }

hdmiBlue OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Blue"
        ::= { hdmi 8 }

hdmiCyan OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Cyan"
        ::= { hdmi 9 }

hdmiMagenta OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Magenta"
        ::= { hdmi 10 }

hdmiYellow OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Yellow"
        ::= { hdmi 11 }

hdmiWallColor OBJECT-TYPE
         SYNTAX  INTEGER {
                        color1(1),
                        color2(2),
                        color3(3),
                        color4(4),
                        color5(5) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Wall Color"
        DEFVAL { color1 }
        ::= { hdmi 12 }

currentInput OBJECT IDENTIFIER 
        ::= { video 6 }

displayMode OBJECT-TYPE
        SYNTAX  INTEGER {
                        brightClassroom(1),
                        darkClassroom(2),
                        sRGB(3),
                        user(4),
                        smartPresentation(5),
                        whiteBoard(6),
                        wallcolor(7) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Display Mode"
        DEFVAL { brightClassroom }
        ::= { currentInput 1 }

brightness OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Brightness."
        ::= { currentInput 2 }

contrast OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Contrast."
        ::= { currentInput 3 }

frequency OBJECT-TYPE
        SYNTAX  INTEGER (-5..5)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Frequency"
        ::= { currentInput 4 }

tracking OBJECT-TYPE
        SYNTAX  INTEGER (0..63)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Tracking"
        ::= { currentInput 5 }

saturation OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Saturation"
        ::= { currentInput 6 }

tint OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Tint"
        ::= { currentInput 7 }

sharpness OBJECT-TYPE
        SYNTAX  INTEGER (0..31)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Sharpness"
        ::= { currentInput 8 }

whitepeaking OBJECT-TYPE
        SYNTAX  INTEGER (0..10)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video White Peaking"
        ::= { currentInput 9 }

degamma OBJECT-TYPE
        SYNTAX  INTEGER (0..3)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Degamma"
        ::= { currentInput 10 }

red OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Red"
        ::= { currentInput 11 }

green OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Green"
        ::= { currentInput 12 }

blue OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Blue"
        ::= { currentInput 13 }

cyan OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Cyan"
        ::= { currentInput 14 }

magenta OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Magenta"
        ::= { currentInput 15 }

yellow OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Yellow"
        ::= { currentInput 16 }

wallColor OBJECT-TYPE
         SYNTAX  INTEGER {
                        color1(1),
                        color2(2),
                        color3(3),
                        color4(4),
                        color5(5) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Wall Color"
        DEFVAL { color1 }
        ::= { currentInput 17 }

aspectRatio OBJECT-TYPE
        SYNTAX  INTEGER {
                        fill(1),
                        match(2),
                        widescreen169(3) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Aspect Ratio"
        DEFVAL { fill }
        ::= { video 7 }

zoom OBJECT-TYPE
        SYNTAX  INTEGER (0..30)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Zoom"
        ::= { video 8 }

keystone OBJECT-TYPE
        SYNTAX  INTEGER (-15..15)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Keystone"
        ::= { video 9 }

videoMute OBJECT-TYPE
        SYNTAX  INTEGER {
                        videomuteoff(1),
                        videomuteon(2)  }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Mute enable/disable"
        DEFVAL { videomuteoff }
        ::= { video 12 }

videoFreeze OBJECT-TYPE
        SYNTAX  INTEGER {
                        unfreeze(1),
                        freeze(2)  }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Freeze / Unfreeze the Video Display"
        DEFVAL { unfreeze }
        ::= { video 13 }

audio OBJECT IDENTIFIER 
        ::= { ligthRaise60wi 3 }

audioVolume OBJECT-TYPE
        SYNTAX  INTEGER (0..40)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Audio volume.
                0 is the minimum and 40 is the maximum."
        ::= { audio 1 }


audioMute OBJECT-TYPE
        SYNTAX  INTEGER {
                        muteoff(1),
                        muteon(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "To mute audio set to 2.
                To un-mute audio set to 1."
        DEFVAL { muteoff }
        ::= { audio 2 }

audioCloseCaptioning OBJECT-TYPE
        SYNTAX  INTEGER {
                        ccoff(1),
                        cc1(2),
                        cc2(3) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "To Enable close captioning set to 2
                for Close Captioning Language CC1 or
                3 for Close Captioning Language CC2.
                To disable close captioning set to 1."
        DEFVAL { ccoff }
        ::= { audio 3 }

audioLineOut OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables/disables the line out."
        DEFVAL { enable }
        ::= { audio 4 }

audioMicrophone OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables/disables the microphone."
        DEFVAL { enable }
        ::= { audio 5 }

audioSpeaker OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables/disables the speaker."
        DEFVAL { enable }
        ::= { audio 6 }

audioMicrophoneVolume OBJECT-TYPE
        SYNTAX  INTEGER (0..40)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Audio microphone volume.
                0 is the minimum and 40 is the maximum."
        ::= { audio 7 }

audioMicrophoneBoost OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables/disables 20dB of attenuation on the microphone input."
        DEFVAL { enable }
        ::= { audio 8 }

audioVGAMic OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables/disables the microphone input when using the VGA input."
        DEFVAL { enable }
        ::= { audio 9 }

audioVGASpeaker OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables/disables the speaker output when using the VGA input."
        DEFVAL { enable }
        ::= { audio 10 }

audioHDMIMic OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables/disables the microphone input when using the VGA input."
        DEFVAL { enable }
        ::= { audio 11 }

audioHDMISpeaker OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables/disables the speaker output when using the VGA input."
        DEFVAL { enable }
        ::= { audio 12 }

audioCompositeMic OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables/disables the microphone input when using the VGA input."
        DEFVAL { enable }
        ::= { audio 13 }

audioCompositeSpeaker OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable(1),
                        disable(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Enables/disables the speaker output when using the VGA input."
        DEFVAL { enable }
        ::= { audio 14 }

network OBJECT IDENTIFIER 
        ::= { ligthRaise60wi 4 }

netStatus OBJECT-TYPE
        SYNTAX  INTEGER {
                        connected(1),
                        disconnected(2) }
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Status of the network.  Currently it will always be connected if this can be read."
        DEFVAL { connected }
        ::= { network 1 }

netDHCP OBJECT-TYPE
        SYNTAX  INTEGER {
                        disable(1),
                        enable(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "To enable DHCP set to 2.
                To disable DHCP set to 1.
                    Note: you must reboot for
                    static setings to take effect."
        DEFVAL { enable }
        ::= { network 2 }

netIPAddress OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "IP Address of the device."
        ::= { network 3 }

netSubnetMask OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "IP Configuration Netmask."
        ::= { network 4 }

netGateway OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Gateway configuration."
        ::= { network 5 }

netPrimaryDNS OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Primary DNS Server configuration."
        ::= { network 6 }

netMacAddress OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "MAC Address."
        ::= { network 7 }

config OBJECT IDENTIFIER 
        ::= { ligthRaise60wi 5 }

configLanguage OBJECT-TYPE
        SYNTAX  INTEGER {
                        english(1),
                        englishUK(2),
                        spanishSpain(3),
                        spanishMexico(4),
                        frenchFrance(5),
                        frenchCanada(6),
                        portugueseBrazil(7),
                        portuguesePortugal(8),
                        japanese(9),
                        chineseSimplified(10),
                        chineseTraditional(11),
                        german(12),
                        italian(13),
                        greek(14),
                        polish(15),
                        czech(16),
                        russian(17),
                        arabic(18),
                        hungarian(19),
                        malay(20),
                        slovenian(21),
                        turkey(22),
                        ukrainian(23) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Set to the following to switch between 
                different languages:
                 1: English
                 2: English (UK)
                 3: Spanish (Spain)
                 4: Spanish (Mexico)
                 5: French (France)
                 6: French (Canada)
                 7: Portuguese (Brazil)
                 8: Portuguese (Portugal)
                 9: Japanese
                10: Chinese (Simplified)
                11: Chinese (Traditional)
                12: German
                13: Italian
                14: Greek
                15: Polish
                16: Czech
                17: Russian
                18: Arabic
                19: Hungarian
                20: Malay
                21: Slovenian
                22: Turkey
                23: Ukrainian"
        DEFVAL { english }
        ::= { config 1 }

configReset OBJECT-TYPE
        SYNTAX  INTEGER { reset(1) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Set to 1 will cause the projector to reset."
        ::= { config 2 }


sysInfo OBJECT IDENTIFIER 
        ::= { ligthRaise60wi 6 }

sysInfoInputFormat OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Current Resolution the system is receiving and outputting. 
                 If no signal is detected, `no signal` should be returned."
        ::= { sysInfo 1 }

sysInfoFWVerDDP OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "DDP Firmware Version"
        ::= { sysInfo 2 }

sysInfoLampHour OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Attached Projector Lamp Hours.  If 
                written to a value of zero, the value is
                reset.  All other writes are ignored.
                "
        ::= { sysInfo 3 }

sysAutoSignal OBJECT-TYPE
        SYNTAX  INTEGER {
                         on(1),
                         off(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Turn on/off autosignal."
        ::= { sysInfo 4 }

sysLampReminder OBJECT-TYPE
        SYNTAX  INTEGER { 
                        on(1),
                        off(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Turn on/off lamp reminder."
        ::= { sysInfo 5 }

sysHighBrightness OBJECT-TYPE
        SYNTAX  INTEGER { 
                        on(1),
                        off(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Turn on/off high brightness."
        ::= { sysInfo 6 }

sysAutoPowerOff OBJECT-TYPE
        SYNTAX  INTEGER (0..240)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Turn on/off auto Power Off."
        ::= { sysInfo 7 }

sysProjectorID OBJECT-TYPE
        SYNTAX  INTEGER (0..99)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Projector ID"
        ::= { sysInfo 8 }

sysStartupScreen OBJECT-TYPE
        SYNTAX  INTEGER { 
                        smart(1),
                        usercapture(2),
                        preview(3)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Startup Screen."
        ::= { sysInfo 10 }

sysGroupName OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Projector Group Name"
        ::= { sysInfo 11 }

sysProjectorName OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Projector Name."
        ::= { sysInfo 12 }

sysLocation OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Location"
        ::= { sysInfo 13 }

sysContact OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Contact"
        ::= { sysInfo 14 }

sysDisplayHour OBJECT-TYPE
        SYNTAX  INTEGER (0..20000)
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Display Hours."
        ::= { sysInfo 15 }

sysModelNumber OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Model Number of the projector"
        ::= { sysInfo 16 }

sysInfoFWVerMpu OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "MPU Firmware Version"
        ::= { sysInfo 17 }

sysInfoFWVerNet OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "NET Firmware Version"
        ::= { sysInfo 18 }

sysInfoSerialNumber OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Projector Serial Number"
        ::= { sysInfo 19 }

sysInfoFWVerTouch OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Touch Firmware Version"
        ::= { sysInfo 20 }

sysTouchEnable OBJECT-TYPE
        SYNTAX  INTEGER { 
                        all(1),
                        vga(2),
                        hdmi(3)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Set to the following to enable/disable
                touch on PC inputs:
                1: Enables touch on both PC inputs (VGA and HDMI).
                2: Touch is only enabled on the VGA input.
                3: Touch is only enabled on the HDMI input."
        DEFVAL { all }
        ::= { sysInfo 21 }

serviceMenu OBJECT IDENTIFIER 
        ::= { ligthRaise60wi 7 }

serviceFailureLog OBJECT-TYPE
        SYNTAX  INTEGER { 
                        normal(1),
                        overtemp(2),
                        fanlock(3),
                        lamperror(4),
                        colorwheelbreak(5),
                        lampoverheat(6),
                        lampdriver(7)
                        }
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Failure log"
        ::= { serviceMenu 1 }

serviceRestoreDefaults OBJECT-TYPE
        SYNTAX  INTEGER { restore(1) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Set to 1 to restore factory defaults.
                NOTE: LightRaise 60wi will reboot immediately after."
        ::= { serviceMenu 2 }

serviceHighSpeedFan OBJECT-TYPE
        SYNTAX  INTEGER { 
                        high(1),
                        normal(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Fan Speed"
        ::= { serviceMenu 3 }

serviceProjectionMode OBJECT-TYPE
        SYNTAX  INTEGER { 
                        front(1),
                        ceiling(2),
                        rear(3),
                        rearceiling(4)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Projection Mode."
        ::= { serviceMenu 4 }

emergencyAlert OBJECT IDENTIFIER 
        ::= { ligthRaise60wi 8 }

emergencyDisplay OBJECT-TYPE
        SYNTAX  INTEGER {
                         on(1),
                         off(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Display the Emergency Alert message"
        ::= { emergencyAlert 1 }

emergencyAlertMsg OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Define the emergency message"
        ::= { emergencyAlert 2 }

failureLogTrap TRAP-TYPE
        ENTERPRISE  smartTechULC
        VARIABLES   { serviceFailureLog }
        DESCRIPTION
                    "A failure has occured.  Send out the notification!"
        ::= 1

powerStateChange TRAP-TYPE
        ENTERPRISE  smartTechULC
        VARIABLES   { powerState }
        DESCRIPTION
                    "Power state on the projector has changed."
        ::= 2

END