U100-U100w-MIB DEFINITIONS ::= BEGIN

IMPORTS
     enterprises, IpAddress               FROM RFC1155-SMI
     OBJECT-TYPE                         FROM RFC-1212
     TRAP-TYPE                             FROM RFC-1215;

smartTechULC OBJECT IDENTIFIER
        ::= { enterprises 29485}

smartTechProducts OBJECT IDENTIFIER
        ::= {smartTechULC 3}

smartTechEmbeddedProducts OBJECT IDENTIFIER
        ::= {smartTechProducts 2}

u100-U100w OBJECT IDENTIFIER 
        ::= { smartTechEmbeddedProducts 13 }

powerState OBJECT-TYPE
        SYNTAX  INTEGER { 
                        onState(1),
                        offState(2),
                        poweringOnState(3),
                        coolingState(4),
                        confirmOffState(5)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Write to on/off to turn the projector on or off.  Cooling and powering status only for reads."
        ::= { u100-U100w 1 }


video OBJECT IDENTIFIER 
        ::= { u100-U100w 2 }

inputSource OBJECT-TYPE
        SYNTAX  INTEGER {
                        vga1(1),
                        composite(3),
                        hdmi1(5),
						hdmi2 (6),
                        next(7)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "To display the current input source as well as
                switch between input sources. Set to the following
                to switch to the specified source:
                1: VGA1 1
                3: Composite
                5: HDMI 1
                6: HDMI 2
				7: Next"
        ::= { video 1 }

vga1 OBJECT IDENTIFIER 
        ::= { video 2 }

vga1DisplayMode OBJECT-TYPE
        SYNTAX  INTEGER {
                        brightRoom(1),
                        darkRoom(2),
                        sRGB(3),
                        user(4),
                        smartPresentation(5) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Display Mode"
        DEFVAL { smartPresentation }
        ::= { vga1 1 }

vga1Brightness OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Brightness."
        ::= { vga1 2 }

vga1Contrast OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Contrast."
        ::= { vga1 3 }

vga1Frequency OBJECT-TYPE
        SYNTAX  INTEGER (-5..5)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Frequency"
        ::= { vga1 4 }

vga1Tracking OBJECT-TYPE
        SYNTAX  INTEGER (0..31)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Tracking"
        ::= { vga1 5 }

vga1WhitePeaking OBJECT-TYPE
        SYNTAX  INTEGER (0..10)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video White Peaking"
        ::= { vga1 6 }

vga1Degamma OBJECT-TYPE
        SYNTAX  INTEGER (0..3)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Degamma"
        ::= { vga1 7 }

vga1Red OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Red"
        ::= { vga1 8 }

vga1Green OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Green"
        ::= { vga1 9 }

vga1Blue OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Blue"
        ::= { vga1 10 }

vga1Cyan OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Cyan"
        ::= { vga1 11 }

vga1Magenta OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Magenta"
        ::= { vga1 12 }

vga1Yellow OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Yellow"
        ::= { vga1 13 }


composite OBJECT IDENTIFIER 
        ::= { video 4 }

compositeDisplayMode OBJECT-TYPE
        SYNTAX  INTEGER {
                        brightRoom(1),
                        darkRoom(2),
                        sRGB(3),
                        user(4),
                        smartPresentation(5)  }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Display Mode"
        DEFVAL { smartPresentation }
        ::= { composite 1 }

compositeBrightness OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Brightness."
        ::= { composite 2 }

compositeContrast OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Contrast."
        ::= { composite 3 }

compositeSaturation OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Saturation"
        ::= { composite 4 }

compositeTint OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Tint"
        ::= { composite 5 }

compositeSharpness OBJECT-TYPE
        SYNTAX  INTEGER (0..31)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Sharpness"
        ::= { composite 6 }

compositeWhitepeaking OBJECT-TYPE
        SYNTAX  INTEGER (0..10)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video White Peaking"
        ::= { composite 7 }

compositeDegamma OBJECT-TYPE
        SYNTAX  INTEGER (0..3)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Degamma"
        ::= { composite 8 }

compositeRed OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Red"
        ::= { composite 9 }

compositeGreen OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Green"
        ::= { composite 10 }
compositeBlue OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Blue"
        ::= { composite 11 }
compositeCyan OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Cyan"
        ::= { composite 12 }
compositeMagenta OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Magenta"
        ::= { composite 13 }

compositeYellow OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Yellow"
        ::= { composite 14 }

hdmi1 OBJECT IDENTIFIER 
        ::= { video 11 }

hdmi1DisplayMode OBJECT-TYPE
        SYNTAX  INTEGER {
                        brightRoom(1),
                        darkRoom(2),
                        sRGB(3),
                        user(4),
                        smartPresentation(5)  }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Display Mode"
        DEFVAL { smartPresentation }
        ::= { hdmi1 1 }

hdmi1Brightness OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Brightness."
        ::= { hdmi1 2 }

hdmi1Contrast OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Contrast."
        ::= { hdmi1 3 }

hdmi1Whitepeaking OBJECT-TYPE
        SYNTAX  INTEGER (0..10)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video White Peaking"
        ::= { hdmi1 4 }

hdmi1Degamma OBJECT-TYPE
        SYNTAX  INTEGER (0..3)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Degamma"
        ::= { hdmi1 5 }

hdmi1Red OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Red"
        ::= { hdmi1 6 }

hdmi1Green OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Green"
        ::= { hdmi1 7 }

hdmi1Blue OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Blue"
        ::= { hdmi1 8 }

hdmi1Cyan OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Cyan"
        ::= { hdmi1 9 }

hdmi1Magenta OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Magenta"
        ::= { hdmi1 10 }

hdmi1Yellow OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Yellow"
        ::= { hdmi1 11 }


hdmi2 OBJECT IDENTIFIER 
        ::= { video 16 }

hdmi2DisplayMode OBJECT-TYPE
        SYNTAX  INTEGER {
                        brightRoom(1),
                        darkRoom(2),
                        sRGB(3),
                        user(4),
                        smartPresentation(5)  }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Display Mode"
        DEFVAL { smartPresentation }
        ::= { hdmi2 1 }

hdmi2Brightness OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Brightness."
        ::= { hdmi2 2 }

hdmi2Contrast OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Contrast."
        ::= { hdmi2 3 }

hdmi2Whitepeaking OBJECT-TYPE
        SYNTAX  INTEGER (0..10)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video White Peaking"
        ::= { hdmi2 4 }

hdmi2Degamma OBJECT-TYPE
        SYNTAX  INTEGER (0..3)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Degamma"
        ::= { hdmi2 5 }

hdmi2Red OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Red"
        ::= { hdmi2 6 }

hdmi2Green OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Green"
        ::= { hdmi2 7 }

hdmi2Blue OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Blue"
        ::= { hdmi2 8 }

hdmi2Cyan OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Cyan"
        ::= { hdmi2 9 }

hdmi2Magenta OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Magenta"
        ::= { hdmi2 10 }

hdmi2Yellow OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Yellow"
        ::= { hdmi2 11 }


		
currentInput OBJECT IDENTIFIER 
        ::= { video 6 }

displayMode OBJECT-TYPE
        SYNTAX  INTEGER {
                        brightRoom(1),
                        darkRoom(2),
                        sRGB(3),
                        user(4),
                        smartPresentation(5)  }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Display Mode"
        DEFVAL { smartPresentation }
        ::= { currentInput 1 }

brightness OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Brightness."
        ::= { currentInput 2 }

contrast OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Contrast."
        ::= { currentInput 3 }

frequency OBJECT-TYPE
        SYNTAX  INTEGER (-5..5)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Frequency"
        ::= { currentInput 4 }

tracking OBJECT-TYPE
        SYNTAX  INTEGER (0..31)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Tracking"
        ::= { currentInput 5 }


whitepeaking OBJECT-TYPE
        SYNTAX  INTEGER (0..10)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video White Peaking"
        ::= { currentInput 9 }

degamma OBJECT-TYPE
        SYNTAX  INTEGER (0..3)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Degamma"
        ::= { currentInput 10 }

red OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Red"
        ::= { currentInput 11 }

green OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Green"
        ::= { currentInput 12 }

blue OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Blue"
        ::= { currentInput 13 }

cyan OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Cyan"
        ::= { currentInput 14 }

magenta OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Magenta"
        ::= { currentInput 15 }

yellow OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Yellow"
        ::= { currentInput 16 }

aspectRatio OBJECT-TYPE
        SYNTAX  INTEGER {
                        fill(1),
                        match(2),
                        widescreen169(3) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Aspect Ratio"
        DEFVAL { fill }
        ::= { video 7 }

zoom OBJECT-TYPE
        SYNTAX  INTEGER (0..30)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Zoom"
        ::= { video 8 }

hposition OBJECT-TYPE
        SYNTAX  INTEGER (0..100)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Horizontal Position"
        ::= { video 9 }

vposition OBJECT-TYPE
        SYNTAX  INTEGER (-5..5)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Vertical Position"
        ::= { video 10 }

videoMute OBJECT-TYPE
        SYNTAX  INTEGER {
                        videomuteoff(1),
                        videomuteon(2)  }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Video Mute enable/disable"
        DEFVAL { videomuteoff }
        ::= { video 12 }

videoFreeze OBJECT-TYPE
        SYNTAX  INTEGER {
                        unfreeze(1),
                        freeze(2)  }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Freeze / Unfreeze the Video Display"
        DEFVAL { unfreeze }
        ::= { video 13 }

videoUsb1Source OBJECT-TYPE
        SYNTAX  INTEGER {
                        vga1(1),
                        hdmi1(5),
                        disabled(6),
						hdmi2 (7)
                         }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Causes USB1 to be active when the input is selected.
                1: VGA1
                5: HDMI1
                6: Disabled
				7: HDMI2

                If usb1source and usb2source are the same, usb1 is used."
        ::= { video 14 }

videoUsb2Source OBJECT-TYPE
        SYNTAX  INTEGER {
						vga1(1),
                        hdmi1(5),
                        disabled(6),
						hdmi2 (7)
                         }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Causes USB2 to be active when the input is selected.
                1: VGA1 
                5: HDMI1
                6: Disabled
				7: HDMI2"
        ::= { video 15 }

audio OBJECT IDENTIFIER 
        ::= { u100-U100w 3 }

audioVolume OBJECT-TYPE
        SYNTAX  INTEGER (0..40)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Audio volume.
                0 is the minimum and 40 is the maximum."
        ::= { audio 1 }

audioMute OBJECT-TYPE
        SYNTAX  INTEGER {
                        muteoff(1),
                        muteon(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "To mute audio set to 2.
                To un-mute audio set to 1."
        DEFVAL { muteoff }
        ::= { audio 2 }

audioVolumeControl OBJECT-TYPE
        SYNTAX  INTEGER {
                        controloff(1),
                        controlon(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "To control the audio, set to 2.
                To not control the audio, set to 1."
        DEFVAL { controlon }
        ::= { audio 3 }

audioCloseCaptioning OBJECT-TYPE
        SYNTAX  INTEGER {
                        ccoff(1),
                        ccon(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Enable close captioning set to 2.
                To disable close captioning set to 1."
        DEFVAL { ccoff }
        ::= { audio 4 }

audioCloseCaptioningLanguage OBJECT-TYPE
        SYNTAX  INTEGER {
                        cc1(1),
                        cc2(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Close Captioning Language CC1/CC2"
        DEFVAL { cc1 }
        ::= { audio 5 }

audioSysOutputSw OBJECT-TYPE
        SYNTAX  INTEGER {
                        lineoutandspeaker(1),
                        lineout(2),
                        speaker(3),
                        none(4) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Audio System Output Switch for WXGA"
        DEFVAL { lineout }
        ::= { audio 6 }


network OBJECT IDENTIFIER 
        ::= { u100-U100w 4 }

netStatus OBJECT-TYPE
        SYNTAX  INTEGER {
                        connected(1),
                        disconnected(2) }
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Status of the network.  Currently it will always be connected if this can be read."
        DEFVAL { connected }
        ::= { network 1 }

netDHCP OBJECT-TYPE
        SYNTAX  INTEGER {
                        disable(1),
                        enable(2) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "To enable DHCP set to 2.
                To disable DHCP set to 1.
                    Note: you must reboot for
                    static setings to take effect."
        DEFVAL { enable }
        ::= { network 2 }

netIPAddress OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "IP Address of the device."
        ::= { network 3 }

netSubnetMask OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "IP Configuration Netmask."
        ::= { network 4 }

netGateway OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Gateway configuration."
        ::= { network 5 }

netPrimaryDNS OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Primary DNS Server configuration."
        ::= { network 6 }

netMacAddress OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "MAC Address."
        ::= { network 7 }


config OBJECT IDENTIFIER 
        ::= { u100-U100w 5 }

configLanguage OBJECT-TYPE
        SYNTAX  INTEGER {
                        englishUS(1),
						englishUK (2),
						french (3),
						german (4),
						dutch (5),
						danish (6),
						finnish (7),
						italian (8),
						norwegian (9),
						russian (10),
						spanish (11),
						swedish (12),
						portugeseBR (13),
						chineseSimplified (14),
						czech (15),
						chineseTraditional (16),
						hungarian (17),
						japanese (18),
						malayasian (19),
						polish (20),
						romanian (21),
						arabic (22),
						turkish (23),
						greek (24),
						slovak (25),
						korean (26),
						hebrew (27)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Set to the following to switch between 
                different languages:
						1: EnglishUS
						2: EnglishUK
						3: French
						4: German
						5: Dutch
						6: Danish
						7: Finnish
						8: Italian
						9: Norwegian
						10: Russian
						11: Spanish
						12: Swedish
						13: PortugeseBR
						14: ChineseSimplified
						15: Czech
						16: ChineseTraditional
						17: Hungarian
						18: Japanese
						19: Malayasian
						20: Polish
						21: Romanian
						22: Arabic
						23: Turkish
						24: Greek
						25: Slovak
						26: Korean
						27: Hebrew"
        DEFVAL { englishUS }
        ::= { config 1 }

configReset OBJECT-TYPE
        SYNTAX  INTEGER { reset(1) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Set to 1 will cause the projector to reset."
        ::= { config 2 }


sysInfo OBJECT IDENTIFIER 
        ::= { u100-U100w 6 }

sysInfoInputFormat OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Current Resolution the system is receiving. 
                 If no signal is detected, `no signal` should be returned."
        ::= { sysInfo 1 } 

sysInfoFWVerDDP OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "DDP Firmware Version"
        ::= { sysInfo 2 }


sysInfoLampHour OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Attached Projector Lamp Hours.  If 
                written to a value of zero, the value is
                reset.  All other writes are ignored.
                "
        ::= { sysInfo 3 }

sysAutoSignal OBJECT-TYPE
        SYNTAX  INTEGER {
                         on(1),
                         off(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Turn on/off autosignal."
        ::= { sysInfo 4 }

sysLampReminder OBJECT-TYPE
        SYNTAX  INTEGER { 
                        on(1),
                        off(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Turn on/off lamp reminder."
        ::= { sysInfo 5 }

sysHighBrightness OBJECT-TYPE
        SYNTAX  INTEGER { 
                        on(1),
                        off(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Turn on/off high brightness."
        ::= { sysInfo 6 }

sysAutoPowerOff OBJECT-TYPE
        SYNTAX  INTEGER (0..240)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Turn on/off auto Power Off."
        ::= { sysInfo 7 }

sysProjectorID OBJECT-TYPE
        SYNTAX  INTEGER (0..999)
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Projector ID"
        ::= { sysInfo 8 }

sysStartupScreen OBJECT-TYPE
        SYNTAX  INTEGER { 
                        smart(1),
                        usercapture(2),
                        preview(3)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Startup Screen."
        ::= { sysInfo 10 }

sysGroupName OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Projector Group Name"
        ::= { sysInfo 11 }

sysProjectorName OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Projector Name."
        ::= { sysInfo 12 }

sysLocation OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Location"
        ::= { sysInfo 13 }

sysContact OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Contact"
        ::= { sysInfo 14 }

sysDisplayHour OBJECT-TYPE
        SYNTAX  INTEGER (0..20000)
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Display Hours."
        ::= { sysInfo 15 }

sysModelNumber OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Model Number of the projector"
        ::= { sysInfo 16 }

sysInfoFWVerMpu OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "MPU Firmware Version"
        ::= { sysInfo 17 }

sysInfoFWVerNet OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "NET Firmware Version"
        ::= { sysInfo 18 }

sysInfoSerialNumber OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Projector Serial Number"
        ::= { sysInfo 19 }

sysInfoFWVerECP OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "ECP Firmware Version"
        ::= { sysInfo 20 }

sysInfoInputDetected OBJECT-TYPE
        SYNTAX  INTEGER {
                         true(1),
                         false(2)
                        }
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Has a signal been detected or not."
        ::= { sysInfo 21 }

sysInfoImageCare OBJECT-TYPE
        SYNTAX  INTEGER { 
                        on(1),
                        off(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Turn on/off ImageCare."
        ::= { sysInfo 24 }		
		
serviceMenu OBJECT IDENTIFIER 
        ::= { u100-U100w 7 }

serviceFailureLog OBJECT-TYPE
        SYNTAX  INTEGER { 
						normal (1),
						lampFailedtoStrikeLS (2),
						lampFailedLF (3),
						lampHoursReminderLh (4),
						lampVoltageTooHighLH (5),
						systemFan1FailF1 (6),
						systemFan2FailF2 (7),
						systemFan3FailF3 (8),
						rearblowerFanFailF4 (9),
						frontblowerFanFailF5 (10),
						colourWheelFailFC (11),
						twelveVoltDCFailurePS (12),
						dDPprocessorFailureFP (13),
						dmdFailureFd (14),
						lampDriverBallastfailureFb (15),
						lampDriverOverheatdH (16),
						systemOverheatOH (17)
                        }
        ACCESS read-only
        STATUS  mandatory
        DESCRIPTION
                "Failure log"
        ::= { serviceMenu 1 }

serviceRestoreDefaults OBJECT-TYPE
        SYNTAX  INTEGER { restore(1) }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Set to 1 to restore factory defaults.
                NOTE: u100-U100w will reboot immediately after."
        ::= { serviceMenu 2 }

serviceHighSpeedFan OBJECT-TYPE
        SYNTAX  INTEGER { 
                        high(1),
                        normal(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Fan Speed"
        ::= { serviceMenu 3 }

serviceProjectionMode OBJECT-TYPE
        SYNTAX  INTEGER { 
                        front(1),
                        ceiling(2),
                        rear(3),
                        rearceiling(4)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Projection Mode."
        ::= { serviceMenu 4 }

servicePowerOverride OBJECT-TYPE
        SYNTAX  INTEGER { 
                        on(1),
                        off(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Indicates if the power override is on or off"
        ::= { serviceMenu 5 }


emergencyAlert OBJECT IDENTIFIER 
        ::= { u100-U100w 9 }

emergencyDisplay OBJECT-TYPE
        SYNTAX  INTEGER {
                         on(1),
                         off(2)
                        }
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Display the Emergency Alert message"
        ::= { emergencyAlert 1 }

emergencyAlertMsg OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS read-write
        STATUS  mandatory
        DESCRIPTION
                "Define the emergency message"
        ::= { emergencyAlert 2 }


failureLogTrap TRAP-TYPE
        ENTERPRISE  smartTechULC
        VARIABLES   { serviceFailureLog }
        DESCRIPTION
                    "A failure has occurred!"
        ::= 1


powerStateChange TRAP-TYPE
        ENTERPRISE  smartTechULC
        VARIABLES   { powerState }
        DESCRIPTION
                    "Power state on the projector has changed."
        ::= 2

END